You should perform proper debugging before using the probe.
Connect probes to the console.
Input the fuel’s standard density and factor to the console.
Measure the fuel height and the water height practically and input the data of them to the console.
The console deals with the data transmitted from the probe and then it displays the product level、interface level and the temperature.
After discharging the fuel, you should measure the height of the fuel and water practically again, then compare them with the displaying height, the error value between them should be no more than ±0.5mm
Note： When the probe is working， don't open the cover of the Electronic Housing.
Video:
fuel tank gauge oil tank monitor fuel tank monitoring system
No comments:
Post a Comment